c7557 c7557 is specifically designed for basic control in multichannel photometry. when connected to a hamamatsu multichannel detecto r head and a personal computer, c7557 allows easy control of the detector head and data acquisition by using dedicated software that comes w ith the unit. c7557 supports all models of hamamatsu multichannel detector heads designed to use a ccd image sensor or ingaas image sensor. c 7557 provides various useful functions (see page 2) that efficiently collect sample data during basic operation. c7557 controller includes a driver/amplifier circuit for operating a multichannel detector head, a power supply circuit, a temp erature stabilizer circuit, an a/d conversion circuit that converts analog signals from the detector head into digital signals, and a data interfa ce. the software supplied with c7557 allows easy control of the multichannel detector head and data acquisition through the scsi in terface. this software runs on windows 95/98/me, by simple operation from the menu neatly displayed on the screen. this software is available with different kinds of dll* 1 to help you develop your own software programs under various developmental environments. *1: dll is one of useful functions the windows 95/98/me. it is a library that can freely start up from application software or execute function procedure. software development can be made easier with dll. to use dll, see the operation manual that comes with the unit. features l designed for basic control in multichannel photometry l easy to control multichannel detector head and data acquisition l supports all models of hamamatsu multichannel detector heads (ccd, ingaas) l software with different kind of dll is supplied with c7557 l compact configuration applications l control of multichannel detector head and data acquisition image sensor multichannel detector head controller for control of multichannel detector head and data acquisition personal computer (pc/at) c7557 scsi * 2 cable dedicated cable (with c7557) image sensor + multichannel detector head power te control i/o signal i/o (integrated scsi board) trig. shutter * 1 timing pulse *1: shutter, etc. are not available. *2: scsi cable and scsi board (card) are not supplied with c7557. connections to detector head and pc kaccc0077eb 1
multichannel detector head controller c7557 functions parameter specification data transfer transfers data stored in memory to computer. exposure time setting 1 ms to 65535 ms (1 ms steps) minimum exposure time depends on sensor detection level. external sync signal input bnc connector input trigger mode internal sync, external sync trigger polarity trigger polarity selectable for external sync shutter timing pulse output outputs timing signal for operating external shutter or external light source via bnc connector. pulse width, delay and polarity settings are possible. video signal output outputs video signal sent from head, via bnc connector. video sync signal output outputs sync signal used to observe video signal output with external device such as oscilloscope, via bnc connector. amplifier gain 1/2, 1, 2, 5, 10, 20, 50, 100 detector head number of detector channels refer to selection guide for image sensor and detector head combination detector cooling control cooling start and stop detector cooling temperature readout converts analog temperature data from detector into digital signal, and transfers it to computer (10 bit a/d conversion) specifications ad converter parameter ccd area image sensor ingaas linear image sensor ad converter 16 bits 12 bits 16 bits conversion speed 4 s/ch 2 s/ch 8 s/ch input range 0 to 10 v -10 to +10 v input method differential input nonlinear linearity 0.1 %fs ad conversion signal external input controller parameter specification clock 20 mhz memory 4 mb (1024 ch 2048 lines) interface scsi equipment parameter specification interface scsi: 50-pin half pitch connector power supply ac100 to 240 v 10 %, 50 to 60 hz power consumption 33 w max. outline dimension 92 (w) 150 (h) 225.8 (d) mm operating temperature 0 to 40 c storage temperature -10 to 50 c weight approx. 2.9 kg scsi interface scsi boards manufactured by adaptec, especially types below, are recommended. pci bus: aha-2940au, 2940u2w, 2940uw, scsi card 2930u, 19160, pcmcia: apa-1460a, 1480 software parameter specification compatible os * 3 windows95, windows98, windows me *3: this software may be run on windows 2000, nt or xp with a simple task. for information on how to do this, please consult wi th our sales office. others bnc cable is separately required when making measurements by external sync, controlling an external shutter or external light s ource, or measuring the video signal with an external device. 2
multichannel detector head controller c7557 operation method 1. make connections as indicated in ? to ? . ? line connect to the power cable. ? scsi *4 connect to a computer through the scsi interface cable. when c7557 is the last unit in the scsi chain, plug a teminator into another scsi port on c7557. ? te control i/o connect to the "te control i/o" terminal on the detector head. ? signal i/o connect to the "i/o signal" terminal on the detector head. ? gnd when a 2-pin ac plug is used with the power cable, use this gnd connector to ground the unit. 2. when all the connections are complete, turn on the power to c7557. 3. install the dedicated softeware. (for details on the dedicated software, refer to the operation manual supplied in the packa ge.) *4: a terminator must be plugged into the last unit in the scsi chain. kaccc0083ec front view line scsi id rs-232c scsi sync.out video out pulse out trig.in rear view power te control i/o signal i/o 3
multichannel detector head controller c7557 software functions the figure below shows the main screen (ccd image sensor: line binning) while running on windows 95/98/me. from the main screen menu, you can easily set operating conditions for the multichannel detector head and data acquisition parameters. the measurement screen displayed with this software shows the image sensor channel along the horizontal axis and the output count along the vertical axis. the main screen menu also allows you to select the desired operation mode: line binning or area scanning (for ccd image sensors), or line scanning (for ingaas image sensors). the parameters that can be set on the main screen are as follows: ?exposure time amplifier gain cooling control number of integrations dark correction type of measurement data start or end of measurement detector head status trigger mode trigger polarity shutter timing pulse width shutter timing pulse delay shutter timing pulse polarity 4
multichannel detector head controller c7557 selection guide for image sensor and detector head combination suitable multichannel detector head image sensor type no. type no. number of active pixel active area [mm (h) mm (v)] types of sensor s7010-0906 512 60 12.288 1.440 s7010-0907 512 124 12.288 2.976 s7010-0908 512 252 12.288 6.048 s7010-1006 1024 60 24.576 1.440 s7010-1007 1024 124 24.576 2.976 c7020 s7010-1008 1024 252 24.576 6.048 s7011-0906 512 60 12.288 1.440 s7011-0907 512 124 12.288 2.976 s7011-1006 1024 60 24.576 1.440 c7021 s7011-1007 1024 124 24.576 2.976 s7015-0908 512 252 12.288 6.048 c7025 s7015-1008 1024 252 24.576 6.048 front-illuminated ccd area image sensor s7030-0906 512 58 12.288 1.392 s7030-0907 512 122 12.288 2.928 s7030-0908 512 250 12.288 6.000 s7030-1006 1024 58 24.576 1.392 s7030-1007 1024 122 24.576 2.928 c7040 s7030-1008 1024 250 24.576 6.000 s7031-0906 512 58 12.288 1.392 s7031-0907 512 122 12.288 2.928 s7031-0908 512 250 12.288 6.000 s7031-1006 1024 58 24.576 1.392 s7031-1007 1024 122 24.576 2.928 c7041 s7031-1008 1024 250 24.576 6.000 s7033-0907 512 122 12.288 2.928 C7043 s7033-1007 1024 122 24.576 2.928 s7034-0907 512 122 12.288 2.928 c7044 s7034-1007 1024 122 24.576 2.928 c7180 s7170-0909 512 512 12.288 12.288 c7181 s7171-0909 512 512 12.288 12.288 s10140-1007 1024 122 12.288 1.464 s10140-1008 1024 250 12.288 3.000 s10140-1009 1024 506 12.288 6.072 s10140-1107 2048 122 24.576 1.464 s10140-1108 2048 250 24.576 3.000 c10150 s10140-1109 2048 506 24.576 6.072 s10141-1007 1024 122 12.288 1.464 s10141-1008 1024 250 12.288 3.000 s10141-1009 1024 506 12.288 6.072 s10141-1107 2048 122 24.576 1.464 s10141-1108 2048 250 24.576 3.000 c10151 s10141-1109 2048 506 24.576 6.072 back-thinned *5 ccd area image sensor g9201-256s 256 12.8 0.25 g9202-512s 512 12.8 0.25 g9203-256s 256 12.8 0.50 g9204-512s 512 12.8 0.50 g9211-256s 256 12.8 0.25 g9212-512s 512 12.8 0.25 g9213-256s 256 12.8 0.50 c8061-01 g9214-512s 512 12.8 0.50 g9205-256w 256 12.8 0.25 g9206-256w 256 12.8 0.25 g9207-256w 256 12.8 0.25 c8062-01 g9208-256w 256 12.8 0.25 ingaas linear image sensor *5: c7557 can be used with following back-thinned ccd area image sensors and multichannel detector heads ? two-stage te-cooled ccd s7032 series/multichannel detector head c7042 ? two-stage te-cooled ccd s7035 series/multichannel detector head c7045 ? two-sta g e te-cooled ccd s7172-0909/multichannel detector head c7182 5
multichannel detector head controller c7557 hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184, www.hamamats u.com u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0 960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 08152 -3750, fax: (49) 08152-2658 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, teleph one: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, unit ed kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: smidesv?gen 12, se-171 41 solna, sweden, telephone: (46) 8-509-031-00, fax: (46) 8 -509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1/e, 20020 arese, (milano), italy, telephone: (39) 02-935-81-733, fax: (39) 02-935-81-741 information furnished by hamamatsu is believed to be reliable. however, no responsibility is assumed for possible inaccuracies or omissions. specifications are subject to change without notice. no patent rights are granted to any of the circuits described herein. ?200 7 hamamatsu photonics k.k. configuration c7557 main unit 1 scsi terminator 1 spare fuse (1.6 a) * 1 detector head connection cables 2 ac cable 1 cd-rom (software, operation manual) 1 * contained in the holder just above the ac cable connector on the c7557 rear panel. note: scsi cable and scsi board (card) are not supplied with c7557. front view side view rear view 150 2 92 2 226 2 2.2 power te control i/o signal i/o line scsi id rs-232c scsi sync.out video out pulse out trig.in kacca0061ec dimensional outline (unit: mm) cat. no. kacc1041e06 jul. 2007 dn 6
|
